Smart Caregiver TL-2015R2, Инструкция по установке и эксплуатации

Страница: 19 / 29

19
LCD Display “Bedpad Return” (2 beeps only)
“User ID 301”
This is for information only to show a restless patient and is not an alert. The display
will remain showing this information until another alert or reset button is pressed.
Fault detect examples (TL-2015R2 OORC switch “on”)
Example a bed transmitter unit is not being received (for example battery needs changing):
Fault Bedhead 0203 - bed transmitter fault at “203”
LCD Display: “BedHead Lost”
“User ID: 203”
Or door monitor:
Fault door 02 - door monitor fault at door number.
LCD Display: “Door Fault 02”
Other faults that are indicated:
a) Power loss on units (with batteries)
Bed mon AC loss “203” - power is lost on this unit. (Only sent once since can be used battery only)
LCD Display: “BedPad AC.Fail”
“User ID: 203”
Door mon “02” AC loss - power is lost on door monitor. (Display type only)
LCD Display: “Door AC.Fail”
“Unit No.: 02”
b) Battery low on units.
Bat low bedpad “203” - battery needs changing on this bed transmitter unit.
LCD Display: “BedPad Bat.Low”
“User ID: 203”
Bat low doormon ”02” - battery needs changing on this door monitor.
LCD Display: “Door Bat.Low”
“Unit No.: 02”
What to do in case of a fault being indicated:
1) Find the unit displayed and change the battery if this is a battery operated device.