Smart Caregiver TL-2015R2, Инструкция по установке и эксплуатации

Страница: 10 / 29

10
5.11 TL-2015R2 Area/ID selection (8 codes)
5.12 Data bus output for connecting multiple TL-2015R2 units
5.13 Alert outputs for external indicators, or other “slave” equipment
5.14 Output for large external display
5.15 12VDC AC mains adaptor/power supply connection
5.16 Internal rechargeable battery back up with “low battery” detection
6.0 TECHNICAL SPECIFICATIONS
1) Operating Frequency: 315MHz (FCC approved), or 433.92MHz (CE)
2) Operating Power
(a) AC mains adaptor (for regional ac voltage input): Regulated 12VDC output (UL/CE approved), or
Batteries: 6V (block of NI-MH batteries)
(b) Current rating for TL-2015R2 (no door lock, or lash light) = 250mA
3) Battery life: In “standby” (ac mains fail) mode, assured 10 hours - dependent upon alert activity
4) Relay contact output: Normally open volt-free contact.
5) Maximum rating for relay output contacts: 1 amp (e.g. for door lock)
6) Display: Simultaneous alphanumeric text for several detected patient transmitter units. These alerts
“rotate” in the display window.
7) User selectable “Reset” function
8) Adjustable volume (potentiometer)
9) Low battery and ac power loss detection with alert
10) Automatic “Out Of Range” and “Interference” detection with alert.
11) Dimensions of housing: 242mm x 168mm x 116mm.
7.0 USER INSTRUCTIONS
The Large Facility Central Monitor is designed to be easy to it and simple to use, requiring the press of a single
button in its simplest user operation. The three operator functions are: adding new units, resetting alerts and
clearing fault indications.
7.1 Adding field units into the central monitoring system
Each TL-2015R2 unit has a memory capacity for up to 200 ield units for a supervised system. When an alert is
activated in your area, the ield unit is automatically added into the TL-2015R2 memory. No action is required by
the user.