Smart Caregiver TL-2015R2, Инструкция по установке и эксплуатации

Страница: 17 / 29

17
To conirm the date, press A-Key, it shows “Storing….”, and beep a sound. Or cancel it by applying
Caregiver key.
7.5.2 Change Time
To change time, the procedures are same as changing date. It just needs to select it for time.
Where, “nn:nn” is the current time.
The others are same.
Alert examples
All codes shown below are examples only. All units are completely programmable to suit user requirements.
Important:
For TL-2015R2, it shows the last 3 digits only on the LCD display, and the room and bed number is now in other
digits.
Eg. BTX-02 , original user programming,
Room Num digit: 12
Bed Num digit : 03
If using for TL-2015R2, it shows “203” only, that TL-2015R2 interprets the room number as “20 “ and the bed
number is “3”.
So, in order to make it display correctly in TL-2015R2, for BTX-02 programming, that at the Room Num digit
positions, input “01”, and at the Bed Num digit positions, input “23” .
That is, the room number digits have to be shifted 1 position to right, and bed number has 1 digit only.
This is applied to all other transmitters.
1) Door monitor alert. (Must be reset at door monitor)
Door “2” user “021” = door monitor at door number”2” and user with wristband “021”.
LCD Display: “Door Alarm 02”
“User ID: 021”
2) Bed transmitter multi function unit. (Must be reset at bed transmitter)
These units have 3 functions with different displays
Bed head “103” = usually means patient call from room “10” bed “3”.
Clock Time
:> Time:nn:nn