Smart Caregiver TL-2015R2, Инструкция по установке и эксплуатации

Страница: 13 / 29

13
Use C-Key to let it waiting for RF input.
TL-2015R2 accepts all TM-04 devices in “Learn-Code”. Make the cordless PAD outputs “Learn-Code” by re-
power-up it, or pressing the PAD for very short time period, says 1-second, and then release.
When TL-2015R2 cannot get a correct learn code, it will wait forever until pressing the A-Key again. Depress the
A-Key at this moment will return it back to the original menu.
When TL-2015R2 got the correct “Learn-Code”, it will show the following display.
Where “nn” is the record number within TL-2015R2, “XXXX” is the S/N number (ID) of TM-04, and “00” is the irst
number (room) assigned for this ID.
Use A-Key to increate the room-number, its range is from “00” to “25”. Once conirm the number, use C-Key to
enter to next display.
Same as room-number setup, the bed-number is from “0” to “9” for the room-number from “00” to “24”. For
room-number 25, it is from “0” to “5”. (This is limited by the pager display)
Conirm the bed-number using the C-Key. It then shows you the following for conirmation
Use C-Key to cancel this ID’s assignment, or use A-Key to conirm and store the record.
After stored, it will beep 2 sounds, and then return to original menu.
Record: nn-<XXXX>
:> Room: 00
Record: nn-<XXXX>
:> Room: 01
Record: nn-<XXXX>
Room/Bed:RR/B ?
Storing...
Cordless PAD
:> Add Rec.
Cordless PAD
:> Add Rec. [nn]
Waiting RF...