manualshive.com logo in svg

SMA AS-Box-S.1, Техническое описание

Поделиться
Скачать
SMA AS-Box-S.1 Скачать руководство пользователя страница 15

SMA Solar Technology AG

Unpacking

Technical Description

SBU2200-TEN083320

15

4 Unpacking

Before installing the Sunny Backup 2200 and the Automatic Switch Box S make sure that all parts are 
included in the delivery.

• Carefully check the packaging, the Sunny Backup 2200 and the Automatic Switch Box S for 

any signs of damage.
Ensure that all parts are included in the delivery (see section 4.1 „Packing List“ (16)).

If something is missing or the Sunny Backup 2200 or the Automatic Switch Box S has been damaged 
during transport, contact your dealer immediately. For more information, please see section 
24 „Contact“ (169).

Information

Keep the packaging in case you need to return the Sunny Backup 2200, the Automatic 
Switch Box S or their accessories.

Содержание AS-Box-S.1





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды