manualshive.com logo in svg

SMA AS-Box-S.1, Техническое описание

Поделиться
Скачать
SMA AS-Box-S.1 Скачать руководство пользователя страница 62

Electrical Connection of the Sunny Backup 2200

SMA Solar Technology AG

62

SBU2200-TEN083320

Technical Description

5. If applicable, install the communication cables of the external communication device (see 

section 7.5.2 „SBU 2200 and an External Communication Device“ (62)) before assembling 
the feed-through element and then re-inserting it into the installation opening on the Sunny 
Backup 2200.

6. Connect the second RJ45 plug of the cables (outside of the Sunny Backup 2200) with the 

corresponding connection sockets on the circuit board of the Automatic Switch Box S (see 
section 8.3 „Communication“ (79)).

7.5.2 SBU 2200 and an External Communication Device

The communication interface is used to communicate with SMA communication devices (e.g. Sunny 
Boy Control, Sunny WebBox) or a PC with appropriate software (e.g. Sunny Data Control). 
Depending on the selected communication interface, up to 50 Sunny Backup 2200 devices can be 
detected at once. Detailed information on this topic can be found in the communication device 
manual, the software or on the Internet at www.SMA.de.
You can install the RS485 communication interface in the Sunny Backup 2200.

A detailed wiring diagram for the communication interfaces can be found in the communication 
device manual. This wiring diagram includes the following information:

• Details on the required cable type
• Which connections of the Sunny Backup 2200 are used
• Whether or not the communication cables must be terminated
• Whether the cable shield needs to be connected to the protective earth conductor

Information

Communication via Powerline/Powerline modem (NLM) is not possible in the Sunny 
Backup System S.

NOTICE!
Potential damage to the internal components of the Sunny Backup 2200 
(e.g., communication interface) due to electrostatic discharge.

• When working on the Sunny Backup 2200 or handling the module assemblies, be 

sure to observe all ESD safety regulations.

• Discharge any static electricity by touching the grounded metal housing.
• Work can begin once all static electricity has been discharged.

Содержание AS-Box-S.1





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды