NOTICE SM CRIMP 2000-V8.0 / Mai 2012
8
3.4
Keypad / Functions / Indicated Messages
The power switch, in the form of a toggle switch with a red knob (N) is located at the top on the
rear of the machine.
All the other controls and display components are located on the front of the machine.
If the Emergency Stop button is depressed (see picture 8), no crimping cycle can take place. If
the Emergency Stop button is depressed and you press on the foot pedal, “Emergency Stop” is
indicated but the cycle does not start.
The following functions can be regulated with 4 buttons on the front of the machine:
3.4.1
The key ‘MODE’
From the main screen display, access those following functions:
Quantity
150
Total quantity
439870
123456789
123456789
Show the normal operating state of the
machine:
The figures highlighted on the first line
show the inputs activities.
The figures highlighted on the second
line show the outputs activities. See
chapter 7.8
Pic. 9
Pic.. 8
Put the counter en zero through reset:
When the display shows up « Quantity »,
Rest 5 seconds on the bottom « reset » to
put back the quantity at zero on the
counter.
Note: The total quantity cannot be put at
zero
