NOTICE SM CRIMP 2000-V8.0 / Mai 2012
4
1
SAFETY FIRST
1.1
Presentation
These operating instructions relate to the SM CRIMP 2000 crimping press.
The SM CRIMP 2000 is state of the art in design and operationally reliable.
It is used exclusively for producing spliced crimped connections.
Any use over and above this application is deemed to be other than for its intended purpose.
The following potential hazards exist in the event of use other than the intended purpose, or
with improper use:
Danger to life and limb.
Danger to the machine.
Danger to other material assets.
The machine should be operated only by personnel trained in its use. The new owner of the
machine or his representative has been instructed in and made aware of the operation of the
machine and all sensitive details. He is responsible for the further training of his personnel.
Any person involved with the operation, maintenance, repair, or inspection of the crimping
press at the user’s premises must have read and unde
rstood the Operating Instructions and,
in particular, this Section on “Safety”.
The responsibilities relating to operation of the machine must be clearly stipulated and
adhered to.
1.2
The general safety device
1.
In addition to the information in these Operating Instructions, the general accident
prevention regulations of your country must be observed.
2.
Before starting work, you must familiarise yourself with all the functions and controls and
how they work.
3.
Safety devices must be checked once per shift for externally visible damage or defects.
Damage must be rectified without delay. Do not continue operating with safety devices off!
4.
The safety devices must never be removed or put out of operation.
