NOTICE SM CRIMP 2000-V8.0 / Mai 2012
6
Please check that the consignment is complete and that there is no concealed or obvious
transport damage.
2.1
Ordering spare parts and requesting Customer Service.
Please note:
When ordering spare parts or seeking customer service, please provide the following:
Part numbers from the enclosed spare parts list.
Machine Serial and Model number.
Tool Cassette number.
3
INITIAL START-UP
3.1
Safety devices
1.
The machine must only be operated with the safety devices on!
2.
Never extend your hands into the danger area!
3.
Should a fault or an accident occur, immediately press the E-Stop (Emergency) button and
disconnect the power cable.
3.2
Power connection
Only qualified personnel must perform any work on the electrical system, such as
connection to power, maintenance or repairs.
Even with the Emergency Stop button pressed, parts of the machine still carry live voltage.
The connection is made via the power cable delivered with the machine. It must be ensured
that the operating voltage corresponds with the mains voltage (230 V/110V). Actuating the
power switch on the rear starts the crimping press.
