NOTICE SM CRIMP 2000-V8.0 / Mai 2012
24
If the clincher corresponds to the current tooling, it’s
advised to cycle up the punch 1 or 2 turns before any
adjustments are made.
If it’s the same clincher,
cycle the punch up in order to
avoid any collision between the clincher and the
punch.
With a magnet, place the new clincher into the clincher
place.
The clincher should be able to move into the clincher
holder. If not, you need to replace the clincher holder.
Using the hand wheel, cycle the press manually until
the punch reaches the centring of the clincher.
Continue to slowly turn the hand wheel while
monitoring the movement of the punch downwards
from the side.
Stop rotating the wheel when you hear a ‘BIP’ noise.
Lift up the alphabetical indicator while turning the
number dial.
At every graduation, the punch goes down to 0.04mm.
Stop turning when the cursor game is completely
deleted
