SkyAzúl Greer MG514, Инструкция по установке, калибровке и обслуживанию

Страница: 41 / 90

38
1. Press the Next or Prev button until “08 Boom Deflection” appears in the information window at
the right.
2. Press the 08 Boom Deflection button to enter the routine.
3. Fully extend the boom at an angle greater than 60°.
4. Lift a suitable calibration load, 85-100% of rated capacity. The load should induce significant
deflection in the boom.
5. Begin the calibration by pressing Edit button.
6. Measure the loaded main boom radius and enter the value. Use the buttons adjacent to the
numerical values at the bottom of the window to scroll left or right and highlight each number.
Press the
Enter On-Load Radius button to enter the number.
7. When complete, the menu will automatically change to the previous menu. It is useful to add .1
ft. to the radius when entering the radius for boom deflection. This will create a slightly positive
radius for most boom operating conditions.
8. Ensure the new displayed radius matches or slightly exceeds the actual measured radius.
9. When all measurements have been recorded, press the
Exit button to move onto the next menu
item.
TEST
SET
SkyAzúl, Equipment Solutions www.skyazul.com 301-371-6126