SkyAzúl Greer MG514, Инструкция по установке, калибровке и обслуживанию

Страница: 16 / 90

13
2.3 The MicroGuard 514 Display
2.3.1 Command Entry
The A , B , C , and D buttons are used most for the procedures described in this document and their
function will vary depending on the routine being performed. Commands for each routine will show in
the information window as text adjacent to the buttons. Follow the directions for each routine carefully.
2.3.2 Number Entry
The display does not have a numerical keypad so when numbers are required, the display will change
to enable number entry.
Buttons B and D are used to scroll left and right. The “cursor” will appear as flashing < > brackets on
either side of the number. Button A is used to enter the number. Button C is used to exit the number
entry subroutine.
As each number is selected, press Button A to enter it into the system. The number will then appear in
the [ ] brackets. Up to five numbers may be entered. When entering a negative value, enter the minus
sign first, then enter the numbers and decimal. When all numbers are correct, press the
C button to
calibrate the complete number.
Example: To enter the value “ - 2.98”:
1. Press button B or D until the number “2” is selected (indicated by flashing < > brackets) and
then press button A to enter the number.
TEST
SET
A
B
C
D
TEST
SET
A
B
C
D
SkyAzúl, Equipment Solutions www.skyazul.com 301-371-6126