SKF SMD 1B, Руководство по жизненному циклу компонентов, Страница: 41 / 114

Page 41
EN
Table of contents
Overview 42
Explanation of symbols and signs 43
1. Safety instructions 44
1.1 Intended use 44
1.2 Authorized personnel 44
1.3 Electric shock hazard 45
1.4 System pressure hazard 45
1.5 Hydraulic pressure hazard 45
2. Lubricants 46
2.1 General information 46
2.2 Selection of lubricants 46
2.3 Approved lubricants 47
2.4 Lubricants and environment 48
2.5 Lubricant hazards 48
3. Transport, delivery, and storage 49
3.1 Lubrication units 49
3.2 Electronic and electrical devices 49
3.3 General notes 49
4. Installation 50
4.1 General remarks 50
4.2 InstallationCabinet installation 50
4.3 Mounting holes 51
4.4 NAMUR switch connection 51
4.4 Technical data SMD 1B 52
4.5 Technical data SMD 2 53
4.6 Technical data SMD 3 54
5. Description 55
5.1 Application 55
5.2 How SMD low meters work 55
5.3 How the gear wheel-type low indicator 55
5.4 Bypass mode 56
5.5 Bypass closed (operating position) 56
5.6 Bypass opened (service position) 57
6. Adjustment 58
6.1 Adjustment of the SMD low meter 58
7. Operation 59
7.1 Startup 59
8. Shutdown/Disposal 60
8.1 Temporary shutdown 60
8.2 Permanent6 shutdown 60
8.3 Dismantling and disposal 60
9. Maintenance 61
9.1 General remarks 61
9.2 Bypass mode 61
9.3 Set to bypass mode (service position)
(up to 14 August 2002) 62
9.4 Reset to normal operation (operating
position) (up to 14 August 2002) 63
9.5 Set to bypass mode (service position)
(up to 14 August 2002) 64
9.6 Reset to normal operation
(operating position - new version) 65
9.7 Dismantling/assembly of gears 66
9.8 Dismantling/assembly of throttle screws 68
9.9 Throttle screw performance 69
10. Troubleshooting Procedures 70
10.1 Startup faults 70
11. Order List 71
12. Spare Parts 73
Table of contents