Page 65
EN
Fig.18 Reset to normal operation
9.6 Reset to normal operation
(operating position - new version)
- see 9.2 ”Bypass mode” and Fig.18
Adjustment of the bypass valve
•
Insert an alle key (
1
) in the bypass valve
(
2
) or (
3
)
• View
A
Turn the bypass valve (
SMD 1B/SMD 2
)
(
2
)
clockwise
until the stop is reached
(approx. 90°)
• View
B
Turn the bypass valve (
SMD 1B/SMD
2
) (
3
) counterclockwise until the stop is
reached (approx. 90°)
or:
•
Turn the bypass valve (
SMD 3
) (
2
)
coun-
terclockwise
until the stop is reached
(approx. 180°)
•
Use an alle key (
1
) to tighten the locking
pin (DIN 915) (
2
) by turning it
clockwise
1
revolution
After turning the bypass valve the gears
of the gear wheel-type low indicator will
spin again => operating position.
3
1
2
throttle screw
View B
Fig. 16 Bypass opened
View A
cover bolts
plastic cover
Fig. 17 SMD 1B/ SMD 2 - with o-ring seal
o-ring
seal
gear chamber
throttle screw
3
1
2
View A
View B
9. Maintenance
Содержание SMD 1B
