SKF LINCOLN P203, Оригинальная инструкция по сборке

Страница: 44 / 88

EN
6. Installation
- 44 -
951-171-021
Version 02
6. Installation
6.1 General information
Only qualified technical personnel may install
the products described in these Instructions.
During assembly pay attention to the
following:
○
Other units must not be damaged by the
assembly
○
The product must not be installed within
the range of moving parts
○
The product must be installed at an ad-
equate distance from sources of heat and
coldness
○
Observe the product's IP degree of
protection
○
Adhere to safety distances and legal pre-
scriptions on assembly and prevention of
accidents
6.2 Place of installation
Protect the product against humidity, dust
and vibrations and install it in an easily ac-
cessible position to facilitate other installa-
tion and maintenance works.
○
Possibly existing visual monitoring de-
vices, e.g. pressure gauges, MIN/MAX
markings or piston detectors, must be
clearly visible
○
Observe prescriptions in chapter Tech-
nical data regarding the installation
position