SKF LINCOLN P203, Оригинальная инструкция по сборке

Страница: 4 / 88

- 4 -
951-171-021
Version 02
EN
Description of the essential health and safety requirements according to 2006/42/EC, Annex I, which have been applied and complied with. Any basic health
and safety requirements not listed here are not relevant to this product.
No.: Basic safety and health requirements Applicable: Complied with:
1.1.1 Definitions YES YES
1.1.2 Principles of safety integration YES YES
1.1.3 Materials and products YES YES
As to 1.1.3 Not fully complied with: The operator has to evaluate the hazards caused by the lubricant on the basis of the safety data sheet (SDS) and take
protective measures, if necessary.
1.1.5
Design of machinery to facilitate its handling YES YES
1.1.6 Ergonomics YES YES
As to 1.1.6 Not fully complied with: The operator has to ensure that the pump is integrated into the superior machine in such a manner that operation and
filling of the pump are ergonomically possible.
1.2
Control systems YES YES
1.2.1 Safety and reliability of control systems YES YES
1.2.3 Starting YES YES
1.2.6 Failure of the power supply YES YES
1.3 Protection against mechanical hazards YES YES
1.3.1 Risk of loss of stability YES YES
1.3.2 Risk of break-up during operation YES YES
As to 1.3.2 Not fully complied with: The operator has to secure the lubrication system against excessive pressure. For this purpose a pressure relief valve with
max. 350 bar opening pressure must be provided on each pump element.
1.3.4
Risks due to surfaces, edges or angles YES YES
1.3.7 Risks related to moving parts YES YES
1.3.9 Risks of uncontrolled movements YES YES
1.5 Risks due to other hazards YES YES
1.5.1 Electricity supply YES YES
1.5.6 Fire YES YES
As to 1.5.6 Not fully complied with: For pumps without control unit, the operator has to take suitable measures to ensure that the relative duty cycle (see
Technical Data) is complied with. Otherwise the motor may generate unacceptably high heat.
Annex to the declaration of incorporation following 2006/42/EC, annex II, no 1 B