Skanti TRP 9250, Техническое руководство, Страница: 62 / 289

SLEEP TIMER ON
Switching on the Sleep Timer.
1. Press to switch off the transceiver and
activate the Sleep Programs.
2. When the Wake Up Time of one of the enabled
Sleep Programs is reached the transceiver
will automatically switch on.
e.g. 15:00.
The receiver and the transmitter
frequency will be set up to the channel which was
stored in this program.
e.g. ITU channel 802
with RX frequency 8722 kHz
and TX frequency 8198.1 KHz.
3. When the Fall Asleep Time of a Sleep Program
is reached the transceiver will be switched off.
When the Sleep Timer is activated and has switched on the Transceiver, you may operate the
Volume Up, Volume Down and Speaker On/Off switch. If you want to deactivate the Sleep Timer,
just press any other key than the Volume and Speaker keys.If you want to activate the Sleep Timer
again, it is necessary to press the Sleep key.When the transceiver is switched on by the Sleep
Timer this is indicated by a flashing colon in the watch display. The colon will stop flashing if the
Sleep Timer is deactivated as described above.
NOTE. Sleep and DSC/Telex operation
If TRP 9250 includes the optional built-in DSC/Telex the Sleep function is modified to a pseudo-
Sleep function complying with the GMDSS requirements on DSC/Telex distress operation as
follows.
Press "Sleep" to acticate the pseudo-Sleep timer.
SLEEP TIMER ON OPERATION
TRP 9250 TECHNICAL MANUAL 2-47