Skanti TRP 9250, Техническое руководство, Страница: 214 / 289

RECEIVING DISTRESS RELAY ACKNOWLEDGEMENT, INFO
If SET UP is entered, the appropriate transmitter and receiver are set automatically to telephony or
telex mode as indicated in the acknowledgement, and to the appropriate distress and safety frequency
in the same band as the acknowledgement call. (If not configurated for automatic control of telex
receiver and transmitter, the telephony receiver and transmitter are set to USB at the telephony distress
frequency in the same band.)
If the handset is lifted off-hook while the acknowledgement is displayed, the telephony transmitter and
receiver are set automatically to the telephony distress and safety frequency in the same band as the
acknowledgement call.
END should be entered when communication is completed. The display returns to STATUS or to
RX-CALL if not all received calls have been read out and scanning is resumed on the transceiver if so
selected.
DSC OPERATION RECEIVING DISTRESS RELAY ACKNOWLEDGEMENT, INFO
6-22 TRP 9250 TECHNICAL MANUAL