Skanti TRP 9250, Техническое руководство, Страница: 134 / 289

Assign TCU Priority / Intercom No.
The Priority/Intercom number is common for both the Priority System and the Intercom facility. Each
Transceiver Control Unit connected to the ScanBus must have different numbers to enable selective
data communication. The numbers range from 1 to 5.
The assigned Priority/Intercom number can be read by pressing "Prog" "25" "Enter" (Read TCU
Priority/Intercom Number) on each TCU. In some installations it might be necessary to change the
numbers, for example if Master Priority is enabled.
No. 91 Assign TCU Priority / Intercom Number.
The current TCU Priority/Intercom Number is displayed in the receiver frequency display.
Change the number with the numeric keys and store it with the "STO" key. Press "Enter"
to return to normal operation.
Repeat the above procedure on each TCU, storing the individual Priority/Intercom
numbers. When the last number is stored the whole system is updated.
Reset Scan, Sweep and Sleep
No. 95 When function number 95 is selected all parameters and frequency tables of
Scan, Sweep and Sleep programmes are deleted and reset to factory setting.
Reset currently used Transceiver Control Unit
No. 96 When function number 96 is selected on a Transceiver Control Unit connected to the
ScanBus, the contents of it’s EEPROM is reset to factory setting. The EEPROM contains
information about ScanBus, Keyboard parameters, Security Code and Priority/Intercom
number. If this function is selected, especially in installations where more than one
Transceiver Control Unit is connected, the set-up made by the user may be changed.
Reset System Parameters to default values
No. 97 When function number 97 is selected, all System Parameters are reset to default values.
The System Parameters are those listed under function number 1 to 94.
Reset total memory and system parameters to default values
No. 98 Function number 98 deletes the total user-programmable channel memory, executes
function number 95 and 97, and resets the Password for the Configuration Mode.
CONFIGURATION INSTALLATION
TRP 9250 TECHNICAL MANUAL 3-67