Skanti TRP 9250, Техническое руководство, Страница: 104 / 289

RX and TX bits:
0: Frequencies do not apply to RX or TX respectively.
1: Frequencies apply to RX or TX respectively.
Both bits are set to "1" for simplex frequencies.
ITU bit:
0: The programmed frequencies are not ITU channels.
1: The programmed frequencies are ITU channels and if the mode is
SSB ( Modulation nibble: 0 or 7 ) they can be recalled with the ITU
short-number.
D4:
Always set to 0.
Modulation nibble:
0: SSB ( USB )
1: LSB
2:
R3E
3: AM
4: CW
5: TLX ( Telex, DSC )
6: Reserved for future use
7: SSB + R3E
8: Reserved for future use
9: Reserved for future use
A: Reserved for future use
B: Reserved for future use
C: Reserved for future use
D: Reserved for future use
E: Reserved for future use
F: Don’t care
Start Channel:
The start channel number for the group.
E.g. 401 for the ITU channel 401.
Number Of Channels:
The total number of frequencies or channels in the group. Legal numbers: 1 to 9998.
Start Frequency:
The first frequency in the group.
Step Frequency:
The fixed frequency- or channel-spacing for the group.
CONFIGURATION PROM INSTALLATION
TRP 9250 TECHNICAL MANUAL 3-33