Skanti TRP 9250, Техническое руководство, Страница: 51 / 289

Delete a Scan Program: Store 00 as the Number Of Channels to be scanned.
Programming annunciator: Will flash during the programming.
Dwell Time: The period in which the receiver will "listen" for a signal on each frequency in the
Scan Table. Selectable from 0.1 seconds to 9.9 seconds.
Hold time: The period in which the receiver will stay on a frequency in the Scan Table if the
Trigger Source has detected a signal. Selectable from 1 second to 98 seconds.
No Hold Time: Store a Hold Time = 0 seconds.
Manual scanning: If you want to scan manually (press the Scan key to step to the next
frequency in the Scan Table), store a Dwell Time = 0 seconds.
Automatic Stop: If you want to stop the scanning when the Trigger Source detects a signal ,
store a Hold Time = 99.
Scan Table:
Scan Program Number Scan Table Counter
Channel Number
Scan Program Number: 10 Scan Programs. Selectable from number 0 to number 9.
Scan Table Counter: Displays the current position in the Scan Table.
e.g. ITU channel 1206 will be stored as the second channel in this Scan Table.
Channel Number: An ITU channel or a channel stored in the User
Programmable Memory.
View parameters and channels of a Scan Program: Press .
Delete a channel: Store 9999 as Channel Number in the scan table position that you wish to
delete.
OPERATION CHANNEL SCANNING, SET UP INFO
2-36 TRP 9250 TECHNICAL MANUAL