Sizewise Bari Rehab Platform 3 Series Скачать руководство пользователя страница 65

Страница: 65 / 74

Troubleshooting

CAUTION:

Only authorized personnel should engage in the troubleshooting

process. Troubleshooting by unauthorized persons could result in personal injury
or equipment damage.

Bari Rehab Platform 3™ Troubleshooting

The bed will not operate with all functions unresponsive:



Ensure the bed is plugged into a power source.



Check that the main power switch on the ECM is set to the “ON” position.



Ensure all cables to the Electronic Control Module are properly connected and secure.



Check the main power fuse in the ECM.

One or more functions fail to operate, the motor(s) will not activate:



Ensure all cables to the Electronic Control Module are properly connected and secure.



Inspect the hand control for damage and ensure it is properly connected to the ECM.



Verify the Trendelenburg switch on the ECM is set to the “ON” position.



Check the power from the ECM to the motor on the section not working.

Motor quits after repeated use:



The motor may have overheated, wait 10 minutes for the motor to cool and try operating
the bed again.

A motor operates but does not turn the actuator:



Inspect the motor coupler to the actuator.



Check the actuator for wear to make sure the roll pin is not sheared off. Please contact a
Sizewise representative for further assistance.

A motor activates (hums) but does not turn (frozen):



Inspect all mechanical components to make sure they are free of any obstacles that may
restrict movement and that they are in good working order.



Inspect that the actuators are greased. Grease if dry. See Lubricating the Actuators section on
page 63.

A function fails to raise or lower fully:



Inspect all mechanical components to make sure they are free of any obstacles that may
restrict movement and that they are in good working order.

NOTE:

If the troubleshooting process does not solve the problem please contact a Sizewise

representative for service.

Содержание Bari Rehab Platform 3 Series











































































Результаты поиска

Содержание Bari Rehab Platform 3 Series

Отзывы:

Похожие инструкции для Bari Rehab Platform 3 Series

Бренды по названию

Популярные бренды

Sizewise Bari Rehab Platform 3 Series, Руководство пользователя

Результаты поиска

Содержание Bari Rehab Platform 3 Series

Отзывы:

Похожие инструкции для Bari Rehab Platform 3 Series

Бренды по названию

Популярные бренды