If you've changed the IP address of this IP camera and
you forget it, there are 3 ways you can recover it:
1.Press and hold the ‘Reset’ button (for 15 seconds)
located at the bottom of this IP camera, to clear all
settings of the IP camera and reset the IP
address back to 192.168.0.231. You’ll lose all settings in
the IP camera.
2.Ask network administrator to check the DHCP lease
table (in the router), if
the camera was set to obtain
the IP address by DHCP, a new record will be
added to
DHCP lease table on the DHCP server when the IP camera
is connected to the local area network.
3.Use the “Admin”-utility to find and/or change the IP-
address of the camera.
(See chapter 2.1)