3.9 FTP and E-Mail Settings
This IP camera is capable to send an Email or perform FTP upload with captured image,
when a motion is detected. This is very convenient since IP camera will guard the
environment automatically for you, and you don’t have to look at the monitor all the time.
You can access this menu by clicking ‘Network Setup' on the top of web management
interface, and opening the 'FTP and E-Mail settings' tab.
3.9.1 E-Mail settings
These settings are used to send the captured picture via Email:
Item
Description
Recipient E-Mail
Address
Input the email recipient’s Email address here. If you have more
than one Email recipient, please add a ; (semicolon) mark between
every Email address. All characters shouldn’t exceed 127 characters.
SMTP Server
Input the IP address or host name of the SMTP server (the server
that delivers the Email for you) here.
If you don’t know, please refer to the SMTP server you’re using in
your Email software (like Outlook, Outlook Express etc.), or ask your
network administrator or ISP.
SMTP Port
Input mail server’s SMTP port here. Most of mail servers use port
number 25.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you to identify
the Email sent by this IP camera by sender’s Email address.
NOTE: Some mail server would reject to deliver the Email from
unknown sender, it’s recommended to input your own Email address
here, or any other actual one.
