For example, if the HTTP port number you specified here is 90 and
the IP address of IP camera is 10.20.20.30, then you have to input
‘
http://10.20.20.30:90
’ in the address bar of your browser.
Click ‘Apply’ to save settings and make the new settings take effect.
3.7.2 RTSP
RTSP (Real-Time Streaming Protocol) allows you to view live video captured by IP camera.
You can set RTSP related settings here.
The descriptions of every setting in this menu will be given below:
Item
Description
Enable RTSP
Select ‘Enable’ to activate RTSP function of this IP camera, select
‘Disable’ to disable it.
RTSP Port
Input the port number which RTSP will use. Default setting is 554.
RTSP Path
Input the path of the RTSP stream.
RTSP Port Range
Input the port range of RTSP. Default setting is 50000 to 60000.
Click ‘Apply’ to save settings and make the new settings take effect.
3.7.3 Dynamic DNS
If your ISP does not give you a fixed Internet IP address (i.e. the Internet address you’re
using when you access the Internet is not always the same – ask your ISP for detailed
information), you can use this function to help you locate the IP address of this IP camera
when you’re away from home or office.
Before you can use this function, you’ll need to apply for an account at dyndns.org
(
http://www.dyndns.org
). Detailed instructions of how to apply a new account can be
found on dyndns.org’s website.
