Sirona XIOS XG Скачать руководство пользователя страница 59

Страница: 59 / 80

64 09 713 D3610

D3610

201.01.08

02 09.2016

Sirona Dental Systems GmbH

5 Operation

Operating Instructions and Installation XIOS XG USB module and sensors 5.7 Removing the hygienic protective sleeve from the sensor

båÖäáëÜ

5.7.2

With Aimright reusable sensor holder system

1. Remove the sensor with the hygienic protective sleeve from the

sensor holder. To do this, open up the sensor holder by pressing

gently on one side as shown in the figure.

2. Carefully push the sensor out of the narrow part of the hygienic

protective sleeve with two fingers.

3. Slide the sensor further out of the hygienic protective sleeve.

4. Hold on to the sensor and remove it from the hygienic protective

sleeve.

NOTICE

The sensor cable is sensitive to mechanical influences.
The cable may become damaged or may wear out prematurely.
➢ Do not pull on the sensor cable when pulling the sensor out of the

hygienic protective sleeve. Slide the sensor further out of the

hygienic protective sleeve with your thumb as described below.

➢ Avoid bending, creasing or rotating the cable or exposing it to other

strains.

Содержание XIOS XG

















































































Результаты поиска

Содержание XIOS XG

Отзывы:

Sirona XIOS XG, Инструкция по эксплуатации и установке, Страница: 59 / 80

Результаты поиска

Содержание XIOS XG

Отзывы: