64 09 713 D3610
D3610
.
201.01.08
.
02 09.2016
37
Sirona Dental Systems GmbH
5 Operation
Operating Instructions and Installation XIOS XG USB module and sensors
5.3 Sliding the hygienic protective sleeve over the sensor
båÖäáëÜ
5.3
Sliding the hygienic protective sleeve over the
sensor
Hygienic protective sleeves are available depending on the size of the
sensor (0, 1 or 2). They fit both XIOS XG Select and XIOS XG Supreme
sensors.
To reorder the hygienic protective sleeves, see"Consumables and spare
parts" [ → 69].
1. Please select a hygienic protective sleeve with a size that matches
the sensor.
2. Slide the Sensor into the Sheath
The hygienic protective sleeve is slightly undersized, so that it
surrounds the sensor tightly and prevents the sensor from
slipping out of place.
WARNING
Sensors and sensor cables must be disinfected prior to initial use.
Patients may become sick due to components that have not been
disinfected.
➢ Remove the sensor connector from the unit.
➢ Clean the sensor and the sensor cable thoroughly with disinfectant
at least twice. Refer to Hygiene.
WARNING
The hygienic protective sleeves and sensor holder tabs are single use
devices.
Patients may become sick due to unsterilized accessories.
➢ Replace the hygienic protective sleeves and sensor holder tabs
after each patient. However, they can be used multiple times on the
same patient. The adhesive on the sensor holder tabs is suitable for
gluing and detaching them from the hygienic protective sleeve
repeatedly.
➢ Under no circumstances should you slide a hygienic protective
sleeve over a sensor where a sensor holder tab is already glued on
it.