12
INSTALLATION INSTRUCTIONS
FOR SEM 7, SEM 8
FRONT OR REAR VENTING
• If venting from the rear, remove 200mm adaptor
plate (Part ‘D’) and replace with front cover plate
(Part ‘E’).
If venting from front, check to see if front adaptor
plate (Part ‘D’) is attached.
STEP 2:
Remove & replace with
cover plate (Part ‘C’)
Remove & replace with
cover plate (Part ‘C’)
(For side or bottom venting instructions, see pages 7 - 9)
Remove & replace with
cover plate (Part ‘C’)
STEP 3:
(Fig. 7)
(Fig. 5)
• Carefully lower downdraft into cutout cabinetry.
• Fix the downdraft inside the cabinet, using the
special fixing brackets (Part ‘F’) supplied with the
product.
• Insert the brackets in the lower side of the
downdraft in such a way that there is a 2 mm
distance between the lower side of bracket and
the bottom of the cabinet.
• This distance will allow the traction to be
positioned downwards of the product, at the
moment of fixing, in order to have the stain-
less steel trim perfectly adhering with the work
surface.
• Before inserting the screws, please make sure
that the appliance is perfectly perpendicular with
the work surface, ensuring unit is square and
levelled with spirit level before turning on.
(Fig. 5)
NB: If the unit is not levelled, the downdraft will
shudder when rising. This could cause damage
to your unit, which is not covered by warranty.
This is installation damage.
2mm
Part ‘F’
Содержание S-DDH1.1
