background image

5

IMPORTANT WARNINGS 
ABOUT THE DOWNDRAFT

•  It is designed to work in both ducted mode with 

outside evacuation, and recirculating mode.

•  These hoods have been designed for personal 

use in the home. The appliance must be used 
by adults. Make sure that the appliance is out of 
reach of children. Make sure that children do not 
operate the controls.

•  When the appliance is delivered, check the overall 

appearance of the packaging. 
Any remarks should be written on the delivery 
coupon, of which you keep a copy. 
Your appliance is designed for normal domestic 
use. It is not designed for commercial or industrial 
use, or for purposes other than those for which it 
was designed.

•  Any consequences of or damage from incorrect 

installation or incorrect use of the appliance will 
not be covered by the manufacturer’s guarantee.

•  Do not ever change or try to change the 

characteristics of this appliance. This would be 
a danger. Repairs must be performed only by an 
authorised technician. 
Always disconnect the hood before carrying out 
cleaning or maintenance operations.

•  Adequately ventilate the room when a cooker 

hood and other appliances, powered by energy 
other than electricity, are used simultaneously, 
so that the hood does not suck any combustion 
fumes.

•  It is not allowed to cook food over open flames 

(flambé) or operate gas hobs without pots 
or pans on them under the hood itself (the 
flames sucked into the hood might damage the 
appliance).

•  Frying with oil must be done under constant 

supervision as hot oils and fats may ignite

•  Respect the guidelines for cleaning and 

replacement of grease filters. Accumulated 
deposits of grease are a fire hazard. 

•  Never use steam or high-pressure devices 

for cleaning your hood (regulations regarding 
electrical safety).

•  Never use the rangehood without the grease 

filters.

•  The minimum distance between the downdraft 

(closed) and the surface above it must be at least 
800mm.

•  When handling the downdraft, never put your 

hands in the field of action of the extractable unit.

•  This appliance can be used by children aged 

from 8 years old. Children shall not play with this 
appliance. Cleaning and user maintenance shall 
not be made by children without supervision

•  NEVER try to extinguish a fire with water, but 

switch off the appliance and then cover the flame 

e.g. with a lid or a fire blanket.

•  If the supply cord is damaged, it must be 

replaced by the manufacturer, its service agent 
or similarly qualified persons in order to avoid a 
hazard.

•  If the supply cord of the appliance is provided 

with a hob, this must be easily accessible.

•  You may also find these instructional materials on 

our website: 

www.siriusbrand.com

.

In the case of the version with external motor, for 
normal downdraft operation, it is necessary to 
use an external motor made by Sirius.

•  Keep these instructions for use with the 

appliance.

•  If the appliance should be sold or passed on 

to others, make sure that the instructions are 
passed on with it.

•  We thank you for taking note of these 

suggestions before installing and using the 
appliance.

•  They have been written for your personal safety 

and the safety of others.

Содержание S-DDH1.1













































Отзывы: