Sirius Satellite Radio S-DDH1.1, Инструкция по установке и эксплуатации

Страница: 24 / 44

24
REMAINING HEAT INDICATOR
EXTRA POWERFUL SETTING
(HOTPLATES MARKED “P”
HEAT UP TIME AUTOMATIC
Glass ceramic hob also features remaining heat indicator “H”. Hotplates are not heated directly, but
through return heat radiating from the dish.
As long as the symbol “H” is on after the hotplate was switched off, the remaining heat may be used for
warming up food or for melting.
Even when the symbol “H” disappears, the hotplate may still be hot.
Extra powerful setting may be additionally switched on for fast cooking on indicated hotplates. This extra
hotplate power is used for heating large quantities of food.
After switching on, the extra power is activated for 10 minutes then automatically switches back on to the
maximum normal level 9.
During the time extra power is activated, the power of other hotplates is limited. This is indicated on the
power display by intermittently flashing the selected cooking level and limited power for a few seconds.
When automatic cooking mode is activated the hotplate will operate at maximum power for a limited
period of time and then automatically switch to the reduced power level to resume cooking. It may be
switched on in any of the hotplates for all power settings except for setting “9” where power is set at
maximum all the time.
Automatic cooking mode is activated on any idle hotplate.
• Choose the required continuous cooking level and hold it for 3 seconds.
• The activated heat up time automatic will be displayed through alternating between “A” and the
selected continuous cooking level on the display.
Activated extra powerful setting
• Press the
(H)
sensor of the required cooking zone, the extra cooking is active. The display shows “P”
Premature turning extra powerful setting off
• Press and scroll on the cursor of the wanted zone, unit you get the “0” if you want to turn off the zone
of until the wanted cooking level.
DANGER
Be careful of burns!