28
Changing present cooking time
• Cooking time can be changed anytime during the operation.
• Simultaneously press sensor
(E)
and
(D)
.
• Simultaneously press
(D + E)
as many times as necessary, to select the zone of which you want to
adjust the timer. The zone is identified by the lighting on of the LED to the right of the display.
• Press the sensors
(D)
or
(E)
.
• If time is not modified in 10 seconds since pressing the sensor
(D+E)
, the timer is keeping the count-
down before the adjusting operation.
Checking remaining cooking time
• Last set timer is always displayed, (the LED to the right of the display of the cooking zone in question
has a lighting stronger than the others).
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which you want to see
the remaining time. The zone is identified by the lighting on of of the LED to the right of the display.
• The timer’s display will display the remaining time of the selected cooking zone.
Turning timer off
When preset time elapses, a beep signals the end, and the hotplate is switched off.
Switch off the alarm by pressing the sensor
(D)
or
(E)
or it switches off automatically after two minutes.
Time setting
• Touch the sensor (A) to activate the cooking hob.
• Simultaneously press sensor (E) and (D) to activate the alarm.
The timer’s display shows “0.00” and:
- If some cooking zone is active: the LED to the right of the display, of the first active cooking zone
from the left, lights on.
Timer can be used as alarm if it is already employed in timer control of one of the hotplates.
Simultaneously press
(D + E)
as many times as necessary to select alarm. The respective LED is located
between the keys
(E)
and
(D)
.
If you want to switch off the timer prior to the end of the preset time:
• Simultaneously press sensor (E) and (D).
• Simultaneously press (D + E) as many times as necessary, to select the zone of which you want to
disable the timer. The zone is identified by the lighting on of the LED to the right of the display.
• Press (D) to the value “0”.
• The illuminated point to the left part of the display is turned off and the timer is deactivated.
ALARM TIMER FUNCTION
Содержание S-DDH1.1
