Singular Sound AEROS Скачать руководство пользователя страница 32

Страница: 32 / 36

AEROS Loop Studio: Manual

General Tech Info

Overdubs:

Shown in yellow, overdubs are recordings that are “on top” of a

previous recording on the same track. Unlimited overdubs enable you to create

layers and depth in your loops without worrying about memory restrictions.

This is similar to what other loopers call “stacks”. You always have two layers of

memory to work with for each individual track: The base layer and the latest

overdub layer. If the current selected track already has an overdub,

overdubbing again will merge the previous overdub layer with the base layer.

Once an overdub is merged, it cannot be unmerged. If you undo only the

overdub layer and keep the base layer, recording another overdub will replace

the undone layer.

The AEROS is compatible with

SD card size (4-32GB)

, class 10 is recommended

for faster loading speed.

Recording time per song:

20 min (mono)

Recording storage:

Internal 3 hours mono, 1.5 hours stereo recording time and

up to 48 hours (mono) storage when using a 32 GB SD card.

Sound Quality:

32-bit ﬂoating point processing, 24-bit recording, 44.1kHz

sample rate, professional DACs, <1ms latency, and 20hz – 20kHz range

Digital dry through bypass:

AEROS does not aﬀect the pass through audio

quality or latency, but the AEROS must be powered on to pass through audio.

External expression pedal:

This is intended as an alternative to using the

volume wheel. Please note that this function is not yet available in the current

ﬁrmware and will be provided in a future update.

Loop Forgiveness Period:

If you press the button to start or end recording

within 300 ms after the measure line, AEROS will consider that you meant to

press the button on the measure line that just passed. This is for the comfort of

players who are used to pressing a button ‘on beat’ instead of in advance of the

measure line - most people miss the intended beat by fraction of a second.

Please note that starting a loop late will leave a visual “hole” in the beginning of

the loop waveform, however the audio is captured in the loop.

Содержание AEROS





































Результаты поиска

Содержание AEROS

Отзывы:

Похожие инструкции для AEROS

Бренды по названию

Популярные бренды

Singular Sound AEROS, Руководство пользователя

Результаты поиска

Содержание AEROS

Отзывы:

Похожие инструкции для AEROS

Бренды по названию

Популярные бренды