manualshive.com logo in svg

Singular Sound AEROS, Руководство пользователя

Поделиться
Скачать
Singular Sound AEROS Скачать руководство пользователя страница 26

25

AEROS Loop Studio: Manual

Settings

Tip: By routing the click to the Aux Out, you can connect a separate speaker to the Aux 

Out so you only hear the click while the audience hears the Main Out.

Click Volume:

 How loud the click track is played.

MIDI IN Start:

 Sets how the AEROS responds to a MIDI Start message, you can choose 

one, both, or neither, though at least one is recommended.

●

Record (only will record if there is no tracks present in the song part)

●

Playback (will start playback if there are tracks present in the song part)

Change Song Part/Stop Song:

 Stop All commands (Play/Stop All button) and Next 

Part commands (change song parts) are enacted at the end of the longest loop in the 

song part. If during recording or overdubbing, will continue recording/overdubbing 

until end of longest loop. Without this feature on, in freeform mode Next Part/Stop All 

functions are immediate, and in quantized mode at the end of the current measure.

●

Immediate/End of Measure(EOM)

●

End of Loop

Mute/ Unmute Track:

 Sets when the Mute/Unmute command (double tap to mute, 

single tap to unmute) will be triggered after being given. Muting from the mixer 

screen will always be immediate. If no tracks are muted, selecting the master volume 

from the mixer view will give the option to “Mute All”. If at least one track is muted, the 

option will be to “Unmute All”.

●

Immediate: Immediately triggers the mute/unmute on a track once mute

command is applied.

●

EOM (End Of Measure): Waits to trigger muting/unmuting until the end of the

currently playing measure.

●

End of Loop: Waits to trigger muting/unmuting until the end of the loop.

Play/Stop All Button:

 Sets whether Play/Stop All Button responds to the press or the 

release of the button.

●

Press: Play/Stop All responds to commands as soon as you press the button,

which makes it more immediate, but will cause a small amount of sound to be

played when holding it down while stopped to clear a song.

●

Release: Play/Stop All responds to commands as soon as you release the

button.

Hit “Restore Default Settings” to reset AEROS to factory global settings.

Содержание AEROS





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды