manualshive.com logo in svg

Singular Sound AEROS, Руководство пользователя

Поделиться
Скачать
Singular Sound AEROS Скачать руководство пользователя страница 16

15

AEROS Loop Studio: Manual

6x6 Controls

PLAY/STOP ALL

SINGLE TAP:

 

●

 Stops playback of all tracks.

  

○

 You can choose in the Main Settings whether it stops

 

 

   immediately/at the end of the measure or at the end of the  

 

 

   longest loop (default) in the song part.

 

●

 Resumes playback of all tracks.

  

○

 You can select different song parts and tracks while the song  

 

 

   is stopped. Pressing the Action button will start overdubbing  

 

 

   or recording the selected track. 

DOUBLE TAP:

 

●

 Immediately stops playback of all tracks, regardless of 

 

   setting.

HOLD 

(when stopped) :

 

●

 Delete all tracks and song parts and start the song over.

PRESS/RELEASE:

 In Main Settings, set whether the Play/Stop All button 

reacts on the press or on the release of the button. Press is more 

immediate, however, holding to delete all tracks while stopped will start 

playback of the song for a few seconds before the delete command is 

enacted.

Содержание AEROS





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды