Singular Sound AEROS, Руководство пользователя

Страница: 6 / 36

5
Your Instrument
AEROS Loop Studio: Manual
Plugging an instrument into the AEROS:
The AEROS has two ¼” (6.35mm) Inputs. You can record in stereo or in mono. The
two ¼” (6.35mm) outputs function in the same way.
The AEROS also has a stereo Aux In audio input that you can plug an additional
instrument into. To record from this source, see the main settings. You must use a
TRS (tip-ring-sleeve) cable to achieve a stereo input signal.
The AEROS does not have phantom power for microphones. This means you may
need a microphone preamp to adjust the microphone signal level — any preamp
will work.
Signal levels:
Before you start recording, play your instruments at the loudest expected level in
the loop studio. The signal meter will appear on the right side. If the signal reaches
the red level, turn down your instrument to prevent clipping. The volume wheel
only controls the output level, not the input level.
Note: Currently the signal meter only displays the input from the Main Left/Right
input ports, not from the Aux in. This will be added in a future update.
OUTPUT
L/R
INPUT
L/R