33
AEROS Loop Studio: Manual
Changelog
Firmware 3.0.0 Changelog:
●
Added quick start guide
●
Added cross fade on loop seams and quick fade in/out on start/stop to prevent audio pops
●
You can now Undo with a hold command while overdubbing
●
Saving/managing songs on SD card is now available in song edit screen and song list screen (Maximum SD card size
supported is 32 GB)
●
Songs are now sorted in song list by last loaded order (all SD card stored songs will be below internal memory stored
songs in the song list screen after bootup)
●
Songs can now be renamed again when editing song
●
Added Memory Used to Stopped Screen: This is how much of the currently loaded song memory has been used (up to
20 minutes mono recording time available per song). Saving the song will merge the overdubs and free up more
memory. This is not the total stored memory of all songs (which can be expanded with the SD card)
●
Added Sync tracks feature (start / length) in song settings: Sync Start forces all tracks to start in the same place. Sync
length will force all tracks to be a ratio of the longest track in the song part (indicated with a red circle around the track
clock while recording) to keep all tracks in sync with each other. See the help text next to these settings for details
●
Added track offsets: If sync start is off, the Aeros will now keep the relative differences between the start points of tracks
after the Aeros is stopped or changes song parts
●
Added global setting: Change song parts/Stop song: Immediate/End of Measure, End of Loop. This controls when song
parts change and when Aeros stops playback after pressing the Stop All button. If End of Loop is enabled, song parts will
change and playback will stop at the end of the longest loop in the currently playing song part, and you will see a
blinking red circle around the longest loop track clock while this is happening. If the [Immediate/EOM] option is selected,
●
Freeform songs will change/stop immediately and Quantized songs will change/stop at the End of Measure. The Next
Part and Stop MIDI commands override this setting, so changing parts/stopping with the BeatBuddy will cause the Aeros
to respond immediately to keep both units in sync.
●
New Setting: Mute Immediately, End of Measure, End of Loop. This is for muting a track with a double tap. Muting in the
mixer screen is always immediate.
●
Added "Mute All" option to mixer screen when no tracks are muted
●
Aeros now resets mixer volume levels to neutral after clearing a song by holding down Play/Stop ALL button
●
New Setting: Record songs in Mono/Stereo (set when starting a new song)
●
New Setting: Play audio in Mono/Stereo (main settings)
●
New Setting: Play/Stop All button on press/release. Previously this button was active on release, it is now active on
press, which makes it more immediate, but will cause a small amount of sound to be played when holding it down while
stopped to clear a song. You can change it with the setting
●
Next Track button in 6x6 mode now works on downpress instead of release
●
Enabled single note time signatures (1/4, 1/8) so songs can be quantized to the beat instead of the measure
●
Tap tempo now follows time signature note type instead of always quarter notes
●
Reduced forgiveness lag from 500ms to 300ms. This is the time of a button pressed after the measure line triggering at
the passed measure line.
●
Allow Main Input to not be routed anywhere. This was requested by users who use a mixer going into the Aeros and
want to prevent a 'phasing' effect.
●
Song is now only loaded when entering loop studio screen upon boot up to prevent long boot up time
●
Refactored Audio block processing for additional stability
●
Made Play/Stop All button work as exit from all screens
●
Click is now audible in both main out and aux out during Count In
●
Added Screenshot function: MIDI message CC127:127 will save a screenshot to the SD card
●
New system to create log files on the SD card if Aeros crashes/freezes. In the rare case that the Aeros crashes, please
email the crash log files to [email protected]
Fixes:
●
Close loop at forgiveness point: Audio will be captured during the forgiveness period (up to 300 ms) and added to the
loop to prevent loop 'holes' when pressing the button shortly after the measure line. (NOTE: The waveform in this
section will not be visible but the audio is present)
●
Limit keyboard input to numbers and letters for first character of song name, to prevent empty song bug
●
Allow spaces in song name
●
Automatically delete transient overdub when muting with double tap
●
Muting with double tap will now not merge the overdub and base layer
●
Mixer now has track selected that was selected in loop studio
●
Fixed cancel recording on undone track making the measure lines disappear
●
Stability improvements on song parts. Fixed BeatBuddy next part crash.
●
Fixed crash when saving long songs
●
Fixed save button not working bug
●
Fixed song with no name being created bug
●
Fixed lost audio tracks after renaming song
●
Fixed crash caused by touching the screen while deleting song
●
Fixed: Cue recording with Next Track in 6x6 while recording and then cancel cue caused currently recording track to
stop recording
Содержание AEROS
Страница 1: ...Manual Firmware 3 0 0 AEROS loop studio ...
