Simuline Cycraft, Инструкция по установке и эксплуатации

Страница: 12 / 74

Page 12
1.3 SAFETY SYSTEM FEATURES
Operators of Cycraft should familiarize themselves with the safety features of Cycraft
to ensure that they are functioning properly for safe and proper operation. Cycraft
incorporates a number of safety features to ensure that accidents and injury will not be
caused to passengers and on-lookers due to the motion of the simulator. Following
is a description of each safety feature.
l Fence: A sturdy metal fence with an entrance door is provided with Cycraft. It will
ensure that on-lookers and waiting players will be kept a safe distance from the moving
cabin. The fence will also prevent on-lookers from approaching too closely and
unnecessarily tripping the photo sensors during play. Warning signs and regulation
signs are attached to the fence and door to inform customers and on-lookers.
l Side Photo Sensor: Two photo sensors attached on either side of the outer frame
of Cycraft cause the motion to stop if any obstacle obstructs the line between the
sensor and the reflective plate during play. Therefore, even if people enter the fence
and approach Cycraft when it is moving, safety is ensured since the photo sensor will
be tripped and motion stopped. Motion resumes 3 seconds after the obstacle is
removed.
l Floor Sensor: The floor plate beneath the cabin (seat) is a pressure sensor, which
activates when stepped on. It is guaranteed to detect pressures above 20 kg.
Activation of the floor sensor will stop the Cycraft motion as with the photo sensors
described above. Motion will re-activate 3 seconds after the pressure is removed.
The floor sensor guarantees safety even in the case when people somehow approach
Cycraft without tripping the photo sensor and also in the case when the passenger falls
from the cabin during play for any reason.
l Seat Belt Sensor: The seat belt buckle in Cycraft is equipped with a sensor that
detects when the seat belt is fastened or not. Cycraft will not start the game unless
the seat belt is fastened properly. Also, if the seat belt is unfastened during the game,
the motion will stop until it is re-fastened.
l Game Stop Button: This button, located inside the cabin allows the player to stop
the game anytime during play. Pressing this button will terminate the game and lower
the cabin to the initial position.
l Motion Stop Switch: The motion stop button located behind the coin chute case
stops the motion when pressed. Motion restarts 3 seconds after the button is
released. This button can be pressed by outside on-lookers or by the operator in