Simuline Cycraft, Инструкция по установке и эксплуатации

Страница: 22 / 74

Page 22
4.4 MOVING THE MACHINE
Only QUALIFIED SERVICE PERSONNEL should carry out this operation.
Cycraft simulator is a complex & delicate machine. Special care must always be taken
when handling Cycraft.
When moving Cycraft within a facility, it is recommended to utilize the casters provided
with the product. It is not necessary to disassemble the heave actuator and/or the safety
link. Only the fence and boarding step with coin chute need to be disassembled.
When Cycraft must be moved long distances by truck, it is recommended that the heave
actuator and safety link be disassembled such that the cabin is set securely on the base
of the outer frame. Trucking Cycraft without the heave actuator disassembled can cause
mechanical damage to the actuator due to shock and vibration during transport. Be sure
to lay the wooden plate between the cabin and the base frame as when Cycraft was
delivered. This plate protects the floor sensors and switches during transport.
l
When moving the machine, be sure to remove the power cord and plug
from the power supply. Moving the machine with the power cord inserted can
cause the power cord to be damaged, resulting in a fire or electric shock when
installed in a new location.
l
When moving the machine, with the heave actuator in the assembled
state, make sure that the machine is not exposed to high vibrations and shock.
Mechanical and structural damage can result.