Page 42
5.12 ASSEMBLING THE FENCE
1) Confirm that boarding step is fitting to the base frame of main machine with no gap
to the ground and locate the 9 fence poles around Cycraft as shown.
Boarding Step
2) Assemble the pole and mesh from the pole no.1 to the pole no.9 in the order of
clockwise. It is needed to be aware that there are 3 kinds of poles. Type B (no 1,9)
are the gate door poles with lower the junction ring other than poles. Others are
Type A. You can identify the Type Bs with the position of O-ring which is lower than
that of Type As. Type C are when fitted to base plate bracket which are screwed
on to the machine. Only three positions are required (no 3,5,7) No7 is the short
base and no 3 is the longest base plate bracket
3) The fence U bracket assembling work is as shown below. Perform total 32
assembling of U bracket and 4 door gate bolt fixings.
A
A
A
A
C
C
B
C
B
Содержание Cycraft
Страница 16: ...Page 16 3 NAMES OF MAJOR PARTS 18 11 12 13 14 15 16 17 28 ...
Страница 30: ...Page 30 Hexa bolt M8 x 30L DU Bush 10 15 Rubber Washer 11 20 3t Spring Washer Flat Washer ...
Страница 73: ...Page 73 10 2 Cabin Schematic SCHEMATIC 2 HERE ...
Страница 74: ...Page 74 10 3 MCU Schematic DOCUMENT END SCHEMATIC 3 HERE ...
