Simrad SL 30, Руководство пользователя

Страница: 83 / 224

SL 30/35 Hull Sonar Operators Manual 974-25007001/2.0
Menu and Software Description Page 4.37
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
a Passive Client, where sonar data can be viewed but not controlled. Upon requesting to
connect, the system asks for the name of the machines through the Machine Name Dialog
Box.
Disconnect From Server disconnects from the server machine.
Connect To Client is used to connect to a remote client machine. A client
machine is the computer with no sonar heads attached to it. This would make the local
machine a Server, usually with sonar heads attached and operating. Upon requesting to
connect, the system asks for the name of the machines through the Machine Name Selection
Dialog box. The remote client is in passive mode by default and can only observe the sonar
data.
Disconnect From Client disconnects from a specific client machine. There can be
multiple clients attached to a server machine. The system prompts the user with the Client
List dialog box to select a particular machine.
Beep Remote This is a diagnostic procedure to sound a beep on the
remote computer. You must make sure that the sound is enabled on the remote machine. If
the connection is made but you can not hear a beep on the remote machine, then there is a
problem with the connection and the connection should be broken and attempted again.
Display Network Connections This menu can be used to display the list of all connections
to this machine. It also indicates if the local machine is a server or client.
Request Control. This menu can be used by a passive client to gain control privileges from
the server and become an active client. Note that you must have a dongle attached to the
printer port, otherwise the system will prompt you with "Key not connected" message. If there
is an other active client in the network, then the system pops a dialog box in the active client
asking permission to take control away.