background image

Scroll pages
Use the rotary knob.

Zoom in/out
Use the 

+

 and 

-

 keys.

Maneuver on a page that is larger than the display area
Use the arrow keys.

Exit the PDF viewer
Use the 

Exit

 key.

Safety precautions

The accuracy of the depth displayed can be affected by many factors, including the type and
location of the transducer and water conditions.
The choice, location, and installation of transducers and other components of the system are
critical to the performance of the system as intended. If in doubt, consult your Simrad dealer.
To reduce the risk of misusing or misinterpreting this instrument, you must read and
understand all aspects of the Installation and Operation manuals. We also recommend that
you practice all operations using the built-in simulator before using this instrument on the
water.

Trademarks

Lowrance

®

 and Navico

®

 are registered trademarks of Navico.

Simrad

®

 is used by license from Kongsberg.

NMEA

®

 and NMEA 2000

®

 are registered trademarks of the National Marine Electronics

Association.
SimNet

®

 is a registered trademark of Navico.

SD

 and microSD

 are trademarks or registered trademarks of SD-3C, LLC in the United

States, other countries or both.
HDMI

®

 and HDMI

, the HDMI Logo, and High-Definition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC in the United States and other countries.

4

Preface

 | S2009-2016 Fish Finder User Manual

Содержание S2009























































Отзывы: