3
Radar
4
Compass
U-bracket mounting
1.
Place the bracket in the desired mounting location. Ensure that the chosen location has
enough height to accommodate the unit fitted in the bracket, and allows tilting of the
unit. Also adequate space is required on both sides to allow tightening and loosening of
the knobs.
2.
Mark the screw locations using the bracket as a template, and drill pilot holes. Use
fasteners suited to the mounting surface material. If the material is too thin for self-
tappers, reinforce it, or mount the bracket with machine screws and large washers. Use
only 304 or 316 stainless steel fasteners.
3.
Screw down the bracket.
4.
(16" units only) Using the screws provided in the gimbal kit, fasten the gimbals to the unit.
5.
Mount the unit to the bracket using the knobs. Hand tighten only. The ratchet teeth in the
bracket and unit case ensure a positive grip and prevent the unit from changing from the
desired angle.
26
Installation
| S2009-2016 Fish Finder User Manual
Содержание S2009
Страница 1: ...ENGLISH S2009 S2016FishFinder User Manual www navico commercial com...
Страница 2: ......
Страница 53: ......
Страница 54: ...988 10946 002 www navico commercial com...