EN
4
Secos - Simplex Energy Control System
2.
Introduction
These instructions describe the installation, operation and maintenance of the Secos control system for surface temperature control.
Please read these instructions carefully before starting the installation work.
In the event of non-observance, all guarantee and warranty claims are void.
The instructions are intended for trained specialist tradesmen who have the appropriate knowledge in handling heating systems,
water pipe installations and electrical installations.
Installation and commissioning may only be carried out by trained specialist personnel.
The illustrations are symbolic and may deviate from the actual product.
Subject to technical modifications and errors.
2.1. Intended purpose and proper use
The Secos Energy Control System is used to distribute heating water in water heating and cooling systems. The system simultaneously
records and controls the volume flows and temperatures of individual circuits.
The Secos Energy Control System is ideal for both new buildings and refurbishments.
The control system may only be operated with the media, operating and ambient conditions specified in the technical data.
The Secos Energy Control System may only be installed and operated in frost-protected, dry rooms.
The Secos Energy Control System should be protected against solar radiation, heat radiation and vibration.
Operation outside the permissible operating and ambient conditions can cause damage to the system.
Usage contrary to the regulations and changes in assembly, construction or components can endanger the safe operation of the system
and lead to the exclusion of all warranty and guarantee claims.
2.2. Flamconnect app for operation
Commissioning the energy control system.
X
The Flamconnect app must be installed on a terminal device (Android or IOS) before commissioning and operation.
Secos
- Simplex Energy Control System
Installation instructions
|
Operating instructions
