EN
28
Secos - Simplex Energy Control System
10. Operation
10.1. Energy saving controller
The Flamconnect app is essential for
setting functions and calling up detailed
information on the individual operating
states.
34
Flamconnect app
Signalling
Status LED:
The energy saving controller contains
a status LED to signal operating states.
35
Energy saving controller
1
Status LED
Status LED:
The energy saving controller contains a status LED to signal operating states.
Model:
Two-colour LED red / green.
Status
Duration
Information
Green
Permanent Ready for operation OK
Green
Flashing
Commissioning required
Off
Off
Not ready for operation
LED is off, e.g. if commissioning has not been completed.
Red
Flashing
Warning, see chapter on Troubleshooting, LED flashes red 1 x per second
Red
Permanent Error, see chapter on Fault-finding / Troubleshooting
Secos
- Simplex Energy Control System
Installation instructions
|
Operating instructions
