EN
16
Secos - Simplex Energy Control System
7.
Installing the Secos energy saving controller
There are various ways of installing the Secos energy saving controller.
Installation site
If the Secos system manifold is installed in the recommended position, the ideal installation location for the Secos energy saving controller
is within reach of the preconfigured connection cables.
If required, the Bus cable can be extended with optional accessories. The cable of the Secos supply line temperature sensor can also be
extended by the customer. For further information see the Electrical connection chapter.
A - Mounting on top hat rail
Mount the controller on the top-hat rail
located in the cabinet.
1
Mount below
2
Pull upwards
3
Press to the rear and snap in
at the top
To disassemble, press the controller
upwards and pull it forward at the top.
Then unscrew below.
19
Mounting on top-hat rail
2
1
3
B - Wall mounting
1. Hold the energy-saving controller unit
against the wall and mark fixing points
on the wall.
2. Fasten with appropriate fasteners
(dowels, screws provided by customer).
A
298.5 mm
B
82.9 mm
C
87.2 mm
D
128.4 mm
E
20.0 mm
F
23.2 mm
G
15.0 mm
H
22.5 mm
20
Wall mounting
E
F
H
D
C
B
A
G
G
4 x
Secos
- Simplex Energy Control System
Installation instructions
|
Operating instructions
