SimonsVoss 3061 DM, Руководство пользователя

Страница: 64 / 72

NOTICE
Always insert button cells with the positive poles next to each
other
The batteries will only offer their full service life if they are installed
correctly
NOTICE
Batteries will corrode if they come into contact with sweat or
grease
Batteries will lose their capacity before time
Corroded batteries may permanently damage the cylinder
a) Never touch batteries with your bare hands
b) You must wear clean gloves free of fat or grease to handle new
batteries
8. Replace the thumb­turn (align the triangle mark as in the
diagram[4]), hold the recessed grip firmly (see diagram) and
fasten the inside thumb­turn by turning in a clockwise direction
about 10°
9. Push recessed grip ring back onto the thumb­turn, so that the
thumb­turn and ring close together in a flush fit
10. Place the installation/battery key on the inside thumb­turn in
such a way that the two teeth lock into the openings in the
locking disc; if necessary, turn the thumb­turn until both teeth
engage into the locking disc
11. Close the thumb­turn again by turning it about 30° in a clockwise
direction until you hear a click
12. Then activate an authorised transponder and check that it
functions
Manual
Door Monitoring Cylinder
64 / 72
SimonsVoss
4 | Maintenance