User manual for Digital Indicator and cooperating software
”Backlight”
- this option allows one to define when the LCD backlight is to be switched on.
The following possibilities are available:
”permanent”
- backlight always On,
”temporary”
- backlight is turned on when any key on the unit is pressed and
switches Off after 1 minute since the last activation of the keys,
and turned on for approximately 10 seconds when the unit is
switched on.
”Brightness”
- brightness of display backlight as a percentage
”Contrast”
- contrast of the display as a percentage
If the display backlight is inactive and the “
Backlight
” option was set as
“
temporary
” pressing any key will
only
switch the backlight on.
Fig. 7.11.
”Display options”
menu
7.4.3.
”Input settings” menu
This menu enables the configuring of current inputs. The number of the configured input
is displayed in the upper part of the display (Fig. 7.12, 7.13).
The following options are available in this menu:
”Name”
- name assigned for the given channel (9-character sequence enabling
identification of given channel),
”Unit”
- 4-character sequence constituting the unit for the value measured on the given
channel.
Fig. 7.12.
”Inputs settings”
(part 1)
”Input type”
- type of input/sensor. The following options are available:
”inactive”
- input is not active
29
i
