User manual for Digital Indicator and cooperating software
3.3.
“INTERFACE OPTIONS”
TAB
This tab contains three sections:
•
RS485 port settings
- in this section define the address of configured device,
transmission speed for the serial interface and the number of the
serial port, to which the configured device is connected. In order for
communication between the program and the device to be possible,
the address and baud rate set in the program must be same as the
ones set in the
device.
•
Display options
- this section allows changing parameters of LCD display
of configured device.
•
Language
- in this section user can select the language of
firmware.
There are two buttons in the lower part of the tab:
•
[Lock write to device]
- lock the possibility of writing configuration registries of the
device through the RS485 interface;
Unlocking the possibility of writing configuration registries through the RS485 serial
interface is only available from the device menu (manual configuration of device).
•
[Synchronize date and time]
- synchronizes date and time of configured device with
computer’s time and date.
Fig. 3.4.
Interface options
tab functions
49
i
Defining parameters
for communicating
with device
LCD parameters setting
Synchronizing device time
and date with computer's
time and date
Locking the possibility of
writing device registers
Language selection
