User manual for Digital Indicator and cooperating software
3.
USING PROGRAM
Fig. 3.1. Program main window
There are four tabs in the central part of program window:
•
Inputs settings
- this tab enables group and individual configuration of all
channels of the device;
•
Logging setup
- this tab enables defining recorded channels, type of
recorded values and recording options;
•
Interface options
- this tab allows user to set RS 485 interface-related
parameters, changing LCD display parameters, software and
firmware language selection, and synchronizing the unit time
and date with computer's time and date;
•
Device information
- this tab allows obtaining basic information about the unit and
update the unit's firmware.
In the right part of the window there are six buttons:
•
[Read from device]
- reads current configuration from the device;
•
[Read from file]
- reads the configuration saved previously to a file on computer’s
hard drive;
•
[Import]
- imports the configuration saved previously to
FlashDrive
•
[Send to device]
- saves the settings shown in the
Inputs settings
tab and writes the
configuration set to the device;
•
[Save to file]
- saves the settings shown in the
Inputs settings
tab and writes the
configuration set to a file on computer’s hard drive;
46
Read current settings
from device, from file
or import settings from
flash disk
Write configuration
set to device, to file
or export settings to
flash disk
