User manual for Digital Indicator and cooperating software
6.2.
MODES
OF RESULT PRESENTATION
The results of measurements conducted for active channels are presented in numeric or
graphic (graph or bar) form. Selection of one of the available results presentation modes can
be made using the
[^]
and
[v]
keys in the measurement mode. Configuration of the method of
displaying in the selected results presentation mode can be made in the menu of the given
presentation mode (see
DESCRIPTION OF RESULTS PRESENTATION MODES MENU
). The
following presentation modes are available:
- "
Single channel
" mode (Fig. 6.2) enables the last
measurement for one of the measurement channels to be
viewed in the numeric and graphic form (bar).
Fig. 6.2.
"
Single channel
" mode
- "
Graph
" mode (Fig. 6.3) enables the momentary values
or averaged values of measurements conducted for one of
measurement channels to be viewed in the form of a
graph.
Fig. 6.3.
"
graph
" mode
- "
Channels list
" mode (Fig. 6.4, 6.5) enables the
measurement results for all active measurement channels
to be viewed in numeric or graphic (bar) form.
Fig. 6.4.
"
Channels list
" mode (values)
Fig. 6.5.
"
Channels list
" mode (bars)
After starting the unit the result presentation mode and channel selected prior to
switching off the unit are active (this information is stored in the EEPROM memory)
6.2.1.
"Single channel" mode
This mode (Fig. 6.6) displays the result of the last measurement for one of the active
channels in numeric form (in the middle part of the display) and in the form of a bar
(percentage, at the bottom of the screen). The graphical indicator (bar) always shows the
relation of the measurement result to the
nominal measurement range
(see description of
"
Hi value
", "
Lo value
" parameters in the "
Inputs settings
" menu).
17
i
